RI40-2W Color Ring Glass Film High Voltage Resistors-Tai Wang Jia (Huizhou) Electronics co.,Ltd.

HVR40
玻璃釉厚膜高压电阻器

HVR40 Glass Glaze Thick Film High Voltage Resistors

1、硅树脂封装，可在空气、高压油、环氧树脂中使用，电阻误差值提供以下四种选择：±1%、±2% 、±5% 。

Silicone resin package, can be used in air, high pressure oil, epoxy resin, the resistance error value provides the following four options：

±1% 、±2% 、±5%.

2、功率范围，0.25W～5W,具有耐高压、耐脉冲、高稳定性、耐潮湿。

Power range, 0.25W ～ 5W, with high voltage resistance, pulse resistance, high stability, and moisture resistance.

3、基体采用95%以上的高品质陶瓷（Al₂ O₃ ），电阻膜层采用贵金属钌、钯等成分浆料，导热好，电性能稳定。

The substrate is made of high-quality ceramics (Al₂O3) with more than 95%, and the resistive film layer is made of noble metal ruthenium, palladium and other components, which have good thermal conductivity and stable electrical properties.

适用范围Application Scope

有高压和脉冲、浪涌的电路中都适用，使用场合相当广泛，如高压电力设备、高压电源、静电设备、喷涂设备、医疗CT&X 光机、高压阻容器、真空设备、分压电路、高压测试设备、高压仪器仪表等。

It is suitable for circuits with high voltage, pulse and surge, and is widely used, such as high-voltage power equipment,high-voltage power supply, electrostatic equipment, spraying equipment, medical CT&X-ray machine, high-voltage resistance container, vacuum equipment, voltage divider circuit, high- voltage test equipment, high-voltage instruments,etc.

额定功率或电压／溫度变化相关曲线

Rated power or voltage/temperature variation related curve

性能指标Performance Parameters

特性 Features

参数 Parameters

试验条件 Test conditions

耐电压

Withstand voltage

应无击穿或飞弧现象

There should be no breakdown or arcing phenomenon

包箔法,施加电压见规格参数,1min

Foil wrapping method, see specifications for applied voltage,1min

过载

overload

△R≤±（1%R+0.05Ω）

2.5 倍额定电压(≤[敏感词]过负荷电压)，5S

2.5times the rated voltage (≤maximum overload voltage)，5S

可焊性

Weldability

沾锡面积不小于 90%

The area of tin dip is not less than 90%

260±10℃、2±0.5S

引出端强度

Terminal strength

△R≤±（1%R+0.05Ω）

拉力：10N、10±1S pull：10N、10±1S

弯曲：2×900 bending：2×900

扭转：2×1800 torsion：2×1800

耐焊接热

Resistant to soldering heat

△R≤±（1%R+0.05Ω）

260±10℃ 10±1S

温度快速变化

rapid changes in temperature

△R≤±(1%R+0.05Ω)

-55±3℃、30min; 155±3℃、30min

5 次循环 (5 times Cyclic)

振动 vibration

△R≤±(1%R+0.05Ω)

10Hz～500Hz、0.75mm 或 98m/S2、6h

绝缘电阻

Insulation resistance

绝缘阻值≥1GΩ

Insulation resistance value≥1GΩ

500±50V、1min

断续过负荷

intermittent overload

△R≤±(2%R+0.1Ω)

2.5 倍额定电压通 1S、断 25S 1000 次

2.5 times rated voltage through 1S、broken 25S 1000 times

电阻温度系数

temperature coefficient

TCR≤±200PPM/℃

高于室温 100℃、恒温 30～40min

above room temperature 100℃、constant temperature 30～40min

耐久性

Durability

△R≤±(5%R+0.1Ω)

70±2℃、1000h，额定直流电压

70±2℃、1000h，Rated DC voltage.

气候顺序

Climate sequence

△R≤±(5%R+0.1Ω)

干热、寒冷、低气压、循环湿热、直流负荷

Dry heat, cold, low pressure, circulating damp heat, DC load

意外过载

Accidental overload

纱网圆筒不应燃烧

The gauze cylinder should not burn

16、25 倍额定功率电压，持续 5±0.5min；或电阻器开路时为止；

16、25 times the rated power and voltage，Continuous 5±0.5min；or until the resistor is open circuited；

稳态湿热

steady-state damp heat

△R≤±(5%R+0.1Ω)

40±2℃、90～95%RH、56 天

40±2℃、90～95%RH、56 days

上限类别温度耐久性 Upper Category Temperature Durability

△R≤±(5%R+0.1Ω)

155±2℃、1000h

规格参数Specification Parameter


型号 model	功率 Power	耐电压 Withstand voltage	[敏感词]使用电压 Maximum operating voltage[V]	[敏感词]过负荷电 The highest overload voltage[V]	封装颜色 Package color	可选精度范围 Optional accuracy range[%]	尺寸 Dimension（mm）
型号 model	功率 Power	耐电压 Withstand voltage	[敏感词]使用电压 Maximum operating voltage[V]	[敏感词]过负荷电 The highest overload voltage[V]	封装颜色 Package color	可选精度范围 Optional accuracy range[%]	L±2	D±1	l±0.05	d
	1/4W	500	500	700	粉色 pink		6.0	2.4		0.55~0.6
	1/2W	600	1000	1500	粉色 pink		9.0	3.0		0.55~0.6
	1WS	700	1200	2000	粉色 pink	±1%(F)	10	3.5	26±2	0.7~0.8
RI40	1W	800	1500	2500	灰色 grey	±2%(G)	12	4.0		0.75~0.8
	2W	800	2000	3000	粉色 pink	±5%(J)	16	5.0		0.75~0.8
	3W	1000	2500	4000	灰色 grey	±10%(K)	17	6.0		0.75~0.8
	5W	1000	3000	5000	灰色 grey		24	8.0		0.75~0.8

1.各种尺寸，规格，电阻值可接受定制。Various sizes, specifications, and resistance values can be customized.

2.额定功率将受到工作电压的影响。Power rating will be affected by operating voltage.

标志说明Logo Description

一、本电阻器采用色标法，色标的基本色码如下表：

This resistor adopts the color code method, the basic color code of the color code is as follows:

颜色 Color	数字一 digital one	数字二 digit two	倍率 Magnification	允许偏 Allowable deviation	偏差代码 Deviation code
黑 Black	0	0	100
棕 Brown	1	1	101	±1%	F
红 Red	2	2	102	±2%	G
橙 Orange	3	3	103
黄 Yellow	4	4	104
绿 Green	5	5	105	±0.5%	D
蓝 Blue	6	6	106
紫 purple	7	7	107
灰 grey	8	8	108
白 White	9	9	109
金 Gold			10-1	±5%	J
银 Silver			10-2	±10%	K
无色 Colorless				±20%	M

二、本电阻器标准品采用四带色标法如图示：
This resistor standard product adopts the four-band color-coding method As shown ：

三、包装数量Packaging Quantity

型号 Model Number	额定功率 Rated power	包装数量 (只/盒) Packaging Quantity (only/box)	包装数量 (只/箱) Packing quantity (Only / Crate)	备注 Remark
RI40	0.25W	2000/4000	40000	T52 编带 T52 Taping
	0.5W	1000/2000	20000	散装/T52 编带 in bulk/T52 Taping
	1W	1000/2000	20000	散装/编带 in bulk/Taping
	2W	500/1000	10000	散装/编带 in bulk/Taping
	3W	500	5000	散装/编带 in bulk/Taping
	5W	250	2500	散装 in bulk

订购信息Ordering Information

选型示例：RI40-1/2W-10M?%T52 编带 Selection example：RI40-1/2W-10M±5%T52Taping
RI40	1/2W	10M	±5%	T52
型号	1/4W	阻值	精度	S:散装
Model Number	1/2W	Resistance	Accuracy	S:in bulk
	1WS
RI40	1W	10K2=10.2KΩ	F:±1%	T52 编带
	2W	1M=1MΩ	J:±5%	T52Taping
	3W	1G5=1.5GΩ	K:±10%
	5W			T63 编带
				T63Taping

You may also be interested in the following products

RI40-5W

RI40-5W Color Ring Glass Film High Voltage Resistors

RI40-3W

RI40-3W Color Ring Glass Film High Voltage Resistors

R40-1W

RI40-1W Metal Glaze Film High Voltage Resistor

RI40-1/2W

RI40-1/2W Metal Glaze Film High Voltage Resistor

RI40-1/4W

RI40-1/4W Metallic Ring Glass Film High Voltage Resistor